Diagnostic MP Biomedicals - USA

MP Biomedicals is dedicated to giving scientists and researchers innovative, quality tools and superior service to aid them in their quest for ground-breaking discovery and turning the hope for life-changing solutions into a reality. The company manufactures and sells more than 55,000 products and is one of the only companies in the industry to offer a comprehensive line of life science,  fine chemical and diagnostic products. MP Biomedicals is a world-wide corporation, with ISO-certified and FDA-approved manufacturing and distribution facilities throughout the globe and headquartered in Southern California.A vast network of global distributors and satellite facilities and offices throughout Europe, Asia, Australia and the Americas assures customers top quality products delivered when and where needed.

MSE - UK

MSE (Measuring and Scientific Equipment) was first formed in 1936 by Dr Ernest Foulkes and was funded with a capital of just £500. At the time, MSE was not a manufacturer of laboratory equipment, but instead specialised in the importation of machine tools into the UK.​

Alied Healthcare - USA

Throughout our company's history we've challenged ourselves to develop products which affect the quality of human life in positive and lasting ways. We're proud to say that during the past 50+ years we've introduced a great variety of products contributing to the health or standard of living of our customers. Allied has strong Midwestern roots. Our history dates back to the 1930's as the medical department of National Cylinder Gas (NCG) in Chicago. NCG produced gases in cylinders and sold them to hospitals in the 1930's and early 1940's. These cylinders had to be carted around from floor to floor when and where needed. In order to eliminate the use of the heavy cylinders, the cost of moving them around, and the explosive hazards of handling them, the idea was developed to pipe medical gases from an outside source to the point of use, either at bedside or in the operating room. Thus the innovative Chemetron® medical gas piping system was developed and the Chemetron Medical Products Division of National Cylinder Gas was formed in 1947. The Chemetron Medical Products Division became the pioneer of piped medical gases and vacuums to hospitals and dental clinics, and soon had piped more facilities than all other companies combined. It also created new healthcare equipment that became the standard that other companies strove for, no longer restricted to the respiratory field. 

​

Metro - USA

Solutions That Simplify Everyday Life For over 80 years, Metro® has been the world's leading manufacturer of storage and transport equipment in Healthcare, Foodservice and Commercial markets. From our innovative wire and polymer shelving lines - Genuine Super Erecta, Super Adjustable II, MetroMax iQ - to carts, C5 heated cabinets, Flo Series mobile computing workstations - the revolutionary Starsys storage and transport system - to a broad range of medication management systems including Lionville Series medication carts and pharmacy fixtures along with our MedDispense Series automated dispensing cabinets,Metro Puts Space to Work in labs, restaurants, hotels, hospitals, schools, retail areas, factories, and beyond.

EverMed - Italy

MP Biomedicals is dedicated to giving scientists and researchers innovative, quality tools and superior service to aid them in their quest for ground-breaking discovery and turning the hope for life-changing solutions into a reality. The company manufactures and sells more than 55,000 products and is one of the only companies in the industry to offer a comprehensive line of life science,  fine chemical and diagnostic products. MP Biomedicals is a world-wide corporation, with ISO-certified and FDA-approved manufacturing and distribution facilities throughout the globe and headquartered in Southern California.A vast network of global distributors and satellite facilities and offices throughout Europe, Asia, Australia and the Americas assures customers top quality products delivered when and where needed.

​

Helmer - USA

Established in 1977 to serve the life science industry, Helmer is a manufacturer and worldwide distributor of high quality laboratory equipment and refrigerated product. Our headquarters are located in Noblesville, Indiana, where we exclusively manufacture Helmer Refrigerators, Freezers, Platelet Storage, and Plasma Thawing Systems. Our products are available direct in the U.S. and Canada, as well as through international distributors worldwide.

​

TRIANGLE  BIOMEDICAL  SCIENCES, INC. - USA

For 25 years, TBS has designed, developed, manufactured and marketed innovative products for the pathology laboratory. The Company has one of the most comprehensive histology product lines in the industry, ranging from sophisticated microwave and conventional pressure vacuum tissue processing instrumentation to the highest quality consumables and reagents. TBS' technology is marketed globally through a network of regional and national distributors.

DDC Dolphin - UK

At DDC Dolphin, we are dedicated to excellence and innovation in sluice room / dirty utility room design, and equipment manufacture, installation, testing and servicing. We specialise in sluice rooms and dirty utility rooms, in care-homes, hospitals, hospices and special needs schools. Twenty years of experience allows us to provide comprehensive and meaningful advice and support throughout planning, design, and specification processes for new or existing facilities. Our industry-leading technology, such as our newly patented hands-free equipment, and microbesafe surfaces, allow us to tailor solutions to your requirements and enable you to comply or exceed infection control standards. Our certified full-time engineers, service and test dirty utility room appliances across the UK, of any manufacturer. 

​

MP Biomedicals

Digiterm designs, manufactures, and markets state-of-the-art medical seating solutions for high-quality Patient Care. Digiterm is one of the world’s leading manufacturers of high-tech medical chairs, which can be perfectly customized, including design, intelligent Comfort & Safety features, thus creating the widest range of products and solutions. Digiterm Comfort Chairs are distributed in more than 40 countries.

Adam - UK

Balances and scales from Adam Equipment meet the application needs of the laboratory, educational, industrial, retail and medical fields. From research analytical balances to compact balances and industrial scales, Adam Equipment has been producing weighing scales, balances and mass measuring equipment for over 40 years.

Muka Metal - Turkey

Muka Metal was founded in 1966 in Kayseri (Turkey). Within its first years of establishment, the company produced steel office furniture. After intensive study, the company started producing electric engines and in accordance to this, electrically powered home accessories. Within the shortest amount of time products such as; washing machines, cookers, ovens and stoves were added to the company product portfolio. Hereby, Muka Metal proves its success in product diversity for many years. Parallel to latest global developments and with R&D, total quality management and high-tech machinery, the company is focused on perfection. As a result of R&D works commenced in 2002 and finalized in 2004, the company started to produce electric hospital beds at European standards. Having patented products, Muka Metal has succeeded to appeal both on the local and international markets. By adopting a maximum quality policy, the company has succeeded to reach thousands of satisfied customers. As being a prominent producer within its sector, Muka Metal serves its clients supported by its 120+ skilled workers and a 13000m2 large production plant. With an annual production capacity of 12.000 electric hospital beds, 15.000 accessories (mattresses, dining tables, and cabinets), the development of new technologies and the continuous improvement in quality, Muka Metal again proves its consistent aim of becoming a global brand.

​

Beacon Medaes- UK

Who is BeaconMedaes? Beacon Medæs is the world’s leading specialist in the design, supply and installation of piped medical gas distribution systems. We proudly play a vital role in hospitals around the globe in sustaining patients when they are at their most vulnerable. Beacon Medæs operates under all the world’s different medical gas standards, so whether you need a system compliant with NFPA 99, ISO 7396, HTM 02-01 or some other standard, we can help. Our main corporate offices and centers of expertise are in Rock Hill, South Carolina, U.S. and Staveley, near Chesterfield, England. We operate through local and regional distributors in over 40 countries and through Atlas Copco customer centers in 140 more. Through more than 60 years, as clinical practice has evolved, we have been at the center of the interface between the patient and the care giver, meeting the need for the increasingly complex array of life support equipment that is at the heart of the modern hospital. Through research, development and applied technology, coupled with a strong focus on customer service, our business is known best for the expertise that provides our clients with solutions tailored to their particular needs.

​